化工机械

FGQ型转鼓式冷却机

    转鼓式冷却机是在筒体的前端用钢板焊接螺旋推料板,在筒体的尾端用钢板交错焊接二折杨料板;在冷却机进料端设有辅助管道系统。
    冷却机的筒体与造粒机一样向出料端倾斜安装。从干燥机送来的较高温度的半成品物料通过进料箱进入筒体后,在旋转筒体内杨料板的带动下使抄起的物料分洒均匀形成密集的料幕;高温度的物料与低温度的逆流冷空气相互作用,使物料内部的热温度扩散至表面并被带走,达到冷却的目的。

    Drum cooler welds spiral material pulling board with steel plate at the fore end the body of canister, welding material rising board with steel plste at the end of canister body, Auxiliary pipe system is set up at the material entrance end of cooler.
    The body of cooler is the same with granulator assembled inclined to material out end. High temperature semi-products material from dryer flow into the body of canister. the material spray evenly driven by rising material board in the body of spiral canister, formed into dense. High temperature material interacts with low temperature reverse flow cold air making hot temperature inside the material spread to the surface and being taken away to reach the purpose of cooling.

型号 主要参数
m
转速
r/min
生产能力
T/h
物料水分%
进口水分
温度℃
进口水分
功率
KW
倾角° 外形尺寸长×宽×高
水平放置(mm)
备注
FGQ15-2400 2.4×20 4.0 30-55 4-10/
55-75
3-6/
25-45
55 2±0.3 22000×3960×4200 逆流冷却
负压通风
FGQ12-2200 2.2×16 4.3 20-40 30 2±0.3 18000×3600×3300
FGQ10-2000 2.0×15 5.1 16-30 22 2±0.3 22000×3420×3250
FGQ8-1800 1.8×12 6.0 12-20 18.5 2±0.3 17500×3210×3070
FGQ5-1500 1.8×12 7.2 8.0-12 15 2±0.3 16200×3030×2860
FGQ3-1200 1.2×10 9.7 6.0-10 7.5 2±0.3 15100×2805×2780
FGQ2-1200 1.2×6 8.7 3.0-6.0 5.5 2±0.3 13600×2510×2378
FGQ1-1200 1.2×6 8.7 2.0-4.0 5.5 2±0.3 11200×2207×1936
公司简介 | 产品中心 | 联系我们 | 在线留言
联系我们:电话传真0716-8464892,邮编434008,电子邮箱ldcoltd@263.net ,公司网址http://www.jzldjx.com
荆州市新俊网络技术有限公司 制作维护 鄂ICP备16013370号